This stainless steel Bollard Light is great for outdoor decoration and entertaining. It's a safe and aesthetic way to light up and transform your outdoor landscapes and pathways at night. It's tested and approved to IP54 (dust and splash proof) so it can withstand Australian weather conditions. Globe, transformer, and switch controls are not included.
Read more
See shipping information.
- STYLISH - Built with a stainless steel finish, providing an elegant and modern feel
- FUNCTIONAL - A simple lighting fixture that adds safety to any outdoor landscape at night (Globe not included)
- LED-READY - Accepts an MR16 LED bulb that consumes less energy and lasts longer than halogen bulbs
- ANTI GLARE - Designed to produce a comfortable light that prevents any glare
- HIGH STANDARD - Dust and splash proof, tested and approved to IP54 rating (Install with waterproof connections and circular cable to avoid moisture ingress)
Specifications
- Height: 445mm
- Diameter: 83mm (widest)
- Globe Connection: 1 x MR16
- Globe Included?: No
- Globe Compatibility: Accepts LED or max. of 20W halogen globe
- IP Rating: IP54
- To maintain the IP rating, use circular cable in junction
- For parallel and single connection, use an appropriate IP68 connector (CONN01, CONN02)
- Input Voltage: 12V
- Input Voltage Range: 12V-25V
- Material: 316 Stainless Steel
- Finish: Stainless Steel
- Screw Material: Stainless Steel
- Mounting: Surface Mounted
- Globe, transformer, and switch controls are not included
- Bollard lights cannot be used inground
Choosing the Right LED Driver for Your Outdoor Light
Complete your outdoor lighting setup with compatible MR16 bulbs and waterproof control gears from CLA Lighting. Since MR16 globes run on low voltage (often at 12V), they require a power transformer to make sure they work properly. When choosing a transformer or LED driver, you have to consider the number of bulbs you want it to power multiplied by the wattage. It's advised that the total wattage of all bulbs should not exceed 80% of the driver's wattage. For example, if you choose to power 4 x 6W MR16 globes (total of 24W) from one LED driver, a 30W driver is required. See table below for a more detailed reference.
| Recommended Globes | Type | Wattage | Recommended Control Gears to Run Globes | Type | Min-Max Load | Qty of Globe/s per Control Gear |
| CLAMR16FNVCESH35W | Halogen | 35W | ETH50.302VA | Transformer | 10W-40W | 1 |
| MR1601A MR1602A |
LED | 6W | ETH50.302VA | Transformer | 10W-40W | 2-6 |
| CLA111011 | LED Driver | 1-8W | 1 | |||
| CLA113011 | 3-24W | 3 | ||||
| CLA115011 | 5-40W | 5 | ||||
| CLA1110011 | 10-80W | 10 | ||||
| CLA1115011 | 15-120W | 15 | ||||
| CLA1120011 | 20-160W | 20 | ||||
| OTTER1 | 1.2W-9.6W | 1 | ||||
| OTTER5 | 15-120W | 15 |
Dimensions
Installation
This product must be installed by a licensed electrician. Installation instructions sheet is provided in the product box.
Warranty
2 year replacement warranty. Conditions apply - See Terms and Conditions of Trade.
