Phare Bollard Light - Anti Glare - 12V MR16 - Titanium

CLA LIGHTING Product Code : CLA-PHARE04M-1301

This titanium Bollard Light is great for outdoor decoration and entertaining. It's a safe and aesthetic way to light up and transform your outdoor landscapes and pathways at night. It's tested and approved to IP54 (dust and splash proof) so it can withstand Australian weather conditions. Globe, transformer, and switch controls are not included.

Read more
- +
Add to Wish List

Enter your postcode to estimate your shipping cost

Item dispatched in 3 - 5 business days Express shipping is not available. *
See shipping information.
Favourite Favourite

Anti Glare Bollard Lights with Titanium Finish

This Bollard Light is ideal for lighting and providing a beautiful and functional touch in your outdoor spaces. This can be easily mounted on the surfaces of your pathways and landscapes to increase warmth, safety, and convenience. Tested and approved to IP54 rating, this Bollard Light is protected against dust and splashes of water. Bollard lights cannot be used inground.

  • STYLISH - Built with a titanium finish, providing a sleek and edgy feel
  • FUNCTIONAL - A simple lighting fixture that adds safety to any outdoor landscape at night (Globe not included)
  • LED-READY - Accepts an MR16 LED bulb that consumes less energy and lasts longer than halogen bulbs
  • ANTI GLARE - Designed to produce a comfortable light that prevents any glare
  • HIGH STANDARD - Dust and splash proof, tested and approved to IP54 rating (Install with waterproof connections and circular cable to avoid moisture ingress)


  • Height: 445mm
  • Diameter: 83mm (widest)
  • Globe Connection: 1 x MR16
  • Globe Compatibility: Accepts LED or max. of 20W halogen globe
  • Globe Included?: No
  • IP Rating: IP54
  • To maintain the IP rating, use circular cable in junction
  • For parallel and single connection, use an appropriate IP68 connector (CONN01, CONN02)
  • Input Voltage: 12V
  • Input Voltage Range: 12V-25V
  • Material: Aluminum
  • Finish: Titanium (anodized)
  • Screw Material: Stainless Steel
  • Mounting: Surface Mounted
  • Globe, transformer, and switch controls are not included
  • Bollard lights cannot be used inground


Choosing the Right LED Driver for Your Outdoor Light

Complete your outdoor lighting setup with compatible MR16 bulbs and waterproof control gears from CLA Lighting. Since MR16 globes run on low voltage (often at 12V), they require a power transformer to make sure they work properly. When choosing a transformer or LED driver, you have to consider the number of bulbs you want it to power multiplied by the wattage. It's advised that the total wattage of all bulbs should not exceed 80% of the driver's wattage. For example, if you choose to power 4 x 6W MR16 globes (total of 24W) from one LED driver, a 30W driver is required. See table below for a more detailed reference.

Recommended Globes Type Wattage Recommended Control Gears to Run Globes Type Min-Max Load Qty of Globe/s per Control Gear
CLAMR16FNVCESH35W Halogen 35W ETH50.302VA Transformer 10W-40W 1
LED 6W ETH50.302VA Transformer 10W-40W 2-6
CLA111011 LED Driver 1-8W 1
CLA113011 3-24W 3
CLA115011 5-40W 5
CLA1110011 10-80W 10
CLA1115011 15-120W 15
CLA1120011 20-160W 20
OTTER1 1.2W-9.6W 1
OTTER5 15-120W 15



This product must be installed by a licensed electrician. Installation instructions sheet is provided in the product box.


2 year replacement warranty. Conditions apply - See Terms and Conditions of Trade.

Write Your Own Review
You're reviewing:Phare Bollard Light - Anti Glare - 12V MR16 - Titanium
Your Rating
You may also like